Carpentry & roofing · VS

Joiner in Martigny

Joiner in Martigny: doors, timber windows, staircases, flooring and made-to-measure fittings. Describe your project and compare the quotes you receive.

Request a quote

Are you looking for a joiner in Martigny for a door, a staircase, a floor or a made-to-measure cupboard? This page presents the most common joinery work in the town at the bend of the Rhône, what the location changes for it and how to compare quotes. The request is made online: it is passed on to craftspeople and firms in the area, who contact you to prepare a free, no-obligation quote.

Joinery in Martigny: buildings from every era

Martigny is a town on the valley floor, set at the bend of the Rhône, with hillsides rising above it. It is also a crossroads: the roads to the Great St Bernard and to Chamonix start from here. This history shows in the buildings. An old centre sits alongside more recent apartment blocks, villas on the outskirts and, higher up, houses and chalets where wood plays a large part.

For a joiner, this means very different jobs from one neighbourhood to the next. The trade covers interior and exterior joinery: doors, timber windows, fitted furniture, cupboards, staircases, flooring and repairs. In Martigny, the same firm can go, in the same week, from adjusting a flat entrance door in an apartment block to restoring a timber staircase in a hillside house.

The most common jobs

  • Interior and front doors: replacement, adjusting a door that rubs, changing a lock or fittings.
  • Timber windows: repair, refurbishment, partial or complete replacement. For the glazing itself, see also windows and double glazing in Martigny.
  • Staircases: renovating steps, balustrades and handrails, or building a new staircase during a conversion.
  • Flooring: laying, sanding, replacing damaged boards.
  • Cupboards and made-to-measure fittings: wardrobes under sloping ceilings, bookshelves, kitchen or hallway furniture adapted to a room with no standard dimensions.

Old buildings and heritage requirements

Martigny has kept traces of its past: the Roman amphitheatre and the Pierre Gianadda Foundation are among the town’s well-known landmarks. If your property is in an older area, the original joinery deserves a closer look before any decision. A moulded door, shutters or windows with glazing bars have a value that is lost when they are replaced with a standard model.

In an old building, a competent joiner starts by assessing what can be kept. Repairing, renewing a seal, refitting an ironmongery item or replacing only the rotten parts may be enough. When replacement is unavoidable, the new joinery sometimes has to follow the design, proportions and colour of the old. If the building is protected, the commune or the competent cantonal department will tell you which rules apply: ask the question before signing a quote, not after.

Mountain and hillsides: wood in daily life

Valais does not have a single climate. The Rhône valley is dry, sunny and hot in summer, while the side valleys and the resorts are cold and snowy. Martigny sits at the junction of these two worlds, and its residents often own a property in one or the other.

On the valley floor, sun and heat put stress on exterior joinery: shutters, exposed front doors, window frames. Finishes wear faster on the south side, and regular maintenance avoids heavier repairs. Ask the joiner about the proposed finish and how often it should be renewed.

If your project concerns a chalet or a timber house at altitude, cold, snow and damp call for other precautions: movement of the wood with the seasons, watertightness of thresholds, protection of exposed parts. A joiner used to working with wood in the mountains will be able to tell you what is suitable. Finally, note that the federal law on second homes applies in the communes concerned: if the chalet is a second home, check with the commune what is permitted before planning a conversion.

Permits, landlord and co-ownership

Not all joinery work requires a permit. Changing a handle, laying a floor or fitting a cupboard indoors does not generally involve a procedure. Things change when the project affects the exterior appearance, the structure, the use of the premises or a protected building.

In Valais, the building permit is issued by the commune in a building zone, and by a cantonal commission outside the building zone. For a hillside house or a chalet, the location of the plot therefore matters. The safest course is to describe your project to the commune of Martigny and ask whether a permit is needed. If your work also concerns energy, for example windows replaced as part of a wider renovation, the cantonal energy and hydropower department runs a subsidy programme: check the current conditions with it before ordering.

As for private agreements:

  • Tenant: the landlord’s written consent is required for any fixed work or work that alters the property.
  • Co-owner: if the windows, shutters or front doors are on the facade or in a shared area, consult the co-ownership regulations and, if necessary, the owners’ meeting.
  • Villa owner: the decision is yours, but the municipal permit still needs to be checked for the exterior appearance.

Preparing your quote request

The more precise the request, the more comparable the quotes. Here is what it is useful to describe:

  1. The nature of the work: repair, replacement or made-to-measure creation.
  2. The location: flat, villa, chalet, old building, floor, access by stairs or lift.
  3. The dimensions: approximate measurements and the number of rooms or items concerned.
  4. The materials you want: type of wood, finish, or a wish to keep what exists.
  5. The constraints: old building, landlord’s consent to be obtained, work to be coordinated with another trade.
  6. Photos: they avoid many misunderstandings before the visit.

A serious quote itemises supplies, workshop fabrication, installation, finishing, removal of the old elements and any share of subcontracting. To keep quotes comparable, ask each firm for the same level of detail. The cost depends mainly on the type of wood, the complexity of the work, the time for measuring and fabrication, and the accessibility of the site. No reliable figure can be given without seeing the work: the quote sets it.

Ready to describe your project? You can request a quote in a few minutes.

Updated 29 October 2026

Free, no-obligation quote request

Describe your project: your request is passed on to tradespeople in your area.

Frequently asked questions

What training does a joiner or cabinetmaker have in Switzerland?
The trade is learned through a CFC (Federal Certificate of Proficiency) as a joiner or cabinetmaker. The joiner works mainly on doors, windows, staircases, flooring and cupboards. The cabinetmaker is more focused on furniture and fine fittings. For a project in Martigny, ask each firm what it does itself and what it passes on to a subcontractor.
Do I need a permit to change windows or a front door in Martigny?
It depends on the nature of the work and the location of the building. Replacing joinery that is visible from the outside, especially in an old or protected building, may require a building permit. In a building zone, it is issued by the municipality. Check with Martigny's building department before ordering.
Can I have made-to-measure fittings installed in a rented flat?
Yes, but the landlord's written consent is required as soon as the work is fixed to the walls or floor, or alters the property. Say so in your request: the joiner can then plan a removable installation. In a co-owned building, also check the regulations if the work affects a shared area or the facade.
Why do joinery quotes vary so much?
The differences come from the type of wood, the finish, the ironmongery, the share of workshop fabrication and the installation conditions. A staircase in a narrow stairwell or a window to be fitted into an old frame requires more measuring and rework. A good quote itemises each of these items.
Can a joiner restore old windows rather than replace them?
Often, yes: repairing damaged timber, repainting, replacing seals or fittings. In an old building, this is sometimes the better option, especially where heritage requirements apply. In your request, ask for repair and replacement to be priced separately so that you can compare.