Interior renovation · BE

Thermal Insulation in Biel/Bienne

Thermal insulation in Biel/Bienne: old-town facades, apartment blocks and villas towards Evilard, roofs, cellars, windows. Steps and comparing quotes.

  • Free, no obligation
  • Reply within 24 hours
  • Local tradespeople
Request a quote

Are you looking for a thermal insulation company in Biel/Bienne, or do you first want to understand what is possible on your building? The bilingual city, set between the lake and the foot of the Jura, mixes older houses, rental apartment blocks and villas: each case calls for a different approach. This page presents the most common insulation work in Biel/Bienne and how to prepare a request for quotes.

Thermal insulation in Biel/Bienne: the most frequent work

Thermal insulation covers several types of work, which are not all equally relevant depending on the building:

  • insulating facades, from the outside or from the inside;
  • insulating the roof and attic;
  • insulating the floor and cellars;
  • dealing with thermal bridges, the points where cold passes through the wall (balconies, lintels, slab junctions);
  • replacing windows.

In Biel/Bienne, most requests concern buildings that already exist. The urban fabric stretches from the old town up the slopes towards Evilard and Magglingen (Macolin): you find apartment blocks and detached villas alike. A villa on the heights mainly has a roof and walls exposed to the wind; a city-centre block tends to have shared-wall facades, cellars and stairwells to deal with. The right starting point is therefore never “which insulation should I choose?”, but “where is the building losing its heat?”.

Winters at the foot of the Jura: why roofs and windows often come first

Biel/Bienne lies on the lakeshore at the foot of the Jura. In this region, winters are colder than on the Lake Geneva arc, which gives more weight to the quality of the envelope: the more marked the cold season, the more an insulation flaw costs in heating and discomfort.

In practice, a few rules of thumb are useful:

  • The roof and attic are generally the surfaces where you gain the most comfort for a relatively contained project, especially if the attic is unoccupied or only partly fitted out.
  • Older windows let air through around the frame as much as through the glazing. Replacement should be planned together with the facade: if you change the windows without touching the walls, the cold spot sometimes moves to the neighbouring wall, with a risk of condensation.
  • Cellars and floors matter a great deal for ground floors: a cold floor is felt immediately, even when the walls are fine.

The proximity of the lake also brings humidity. Before adding a layer of insulation to an old wall, you need to make sure the wall is sound: fitting insulation onto a damp wall traps the problem. A serious professional starts by examining the condition of the substrate.

Old town and older buildings: insulating without spoiling

Biel/Bienne’s old town is made up of old houses, often tightly packed, whose facades contribute to the identity of the neighbourhood. External insulation changes the thickness of the wall, the alignment of window surrounds, the roof overhangs and sometimes the mouldings. This explains why a solution so common on a recent villa is much more delicate here.

For an older building in the centre, other options are frequently considered:

  1. Internal insulation, which preserves the facade but slightly reduces the living area and requires careful attention to the junctions with floors and partition walls.
  2. The attic and roof, often less visible from the street.
  3. The cellar floor, which improves comfort on the ground floor without touching the exterior appearance.
  4. Suitable windows, whose design and materials respect the character of the building where the municipality requires it.

These choices cannot be improvised: an old wall breathes differently from a concrete wall, and some insulants are not suited to it. It is up to the company to justify its proposal in light of the actual construction.

Apartment blocks and villas on the slopes towards Evilard and Magglingen

Higher up, towards Evilard and Magglingen (Macolin), the buildings change: rental blocks, small co-ownerships and villas, often exposed to the wind and sometimes with more restricted access because of the slope. Two practical consequences for a project:

  • Access and logistics: a narrow or sloping street complicates setting up scaffolding and delivering materials. Mention it from the start, as it may change the quote.
  • Exposure: a west- or north-facing facade, battered by the wind, is not treated like a sheltered one. State the orientation of the rooms that give you trouble.

For an apartment block, the decision is rarely taken alone: it is the co-ownership meeting, or the owner for a rental building, that decides. A CECB (cantonal building energy certificate) helps to present an order of priorities that everyone can understand.

Procedures: permission, the canton of Bern and the owner’s agreement

A few rules to keep in mind, to be checked systematically with the relevant authorities:

  • Permission: external insulation alters the facade; permission may be needed depending on the municipality and the building. In the canton of Bern, the building permit is issued by the municipality or by the prefecture depending on the project. Ask the municipality of Biel/Bienne before ordering.
  • Energy and subsidies: the Buildings Programme can support insulation work depending on the canton, and the canton of Bern has a subsidy programme run by the office for the environment and energy. Conditions and filing deadlines must be checked before signing, not afterwards.
  • CECB: this cantonal certificate helps to prioritise the work and can accompany your application.
  • Owner, landlord or co-ownership: as a tenant, you cannot decide on work affecting the envelope; the landlord’s agreement is required. In a co-ownership, insulating a facade or a roof falls under the common parts and goes through the meeting of owners.
  • Bilingualism: Biel/Bienne is officially bilingual. Letters from the municipality may arrive in French or in German, and you can address the services in either language. In your request, specify which language you would like to be contacted in.

Preparing your request and comparing insulation quotes in Biel/Bienne

The more precise your description, the more comparable the quotes. Before you request a quote, gather:

  • the type of building (older house in the centre, apartment block, villa on the heights), its approximate age and its address in the city;
  • what is troubling you: cold rooms, draughts, damp, high heating bills;
  • the parts concerned: facade, roof, attic, cellar, windows;
  • your status: owner, co-owner or tenant, and whether the landlord’s agreement has been obtained;
  • whether you already have a CECB or photos of the current condition;
  • access constraints (narrow street, slope, inner courtyard).

When the offers arrive, compare what they contain rather than the total alone. A good quote specifies the type and thickness of the insulation, preparation of the substrate, treatment of thermal bridges, finishes (render, lining, junctions), scaffolding, waste removal and, where relevant, removal of the old windows. Also ask whether the permission and subsidy applications are included or left to you.

The cost depends on several factors: the surface to be treated, the height of the building, access to the site, the type of insulation, the condition of the substrate, the complexity of the details (balconies, openings, roof) and the level of finish. Two quotes that are far apart often signal different services; ask for the difference to be explained before you choose.

Other useful pages for your property in Biel/Bienne

Updated 29 October 2026

Free, no-obligation quote request

Describe your project: your request is passed on to tradespeople in your area.

Step 1 of 2

Your project

Start with the type of work and the town where the job is. Your contact details are asked for in the next step, with a free field to describe the project if you wish.

  • Reply within 24 hours
  • Free
  • No obligation
  • Local tradespeople

Frequently asked questions

Do I need permission to insulate a facade in Biel/Bienne?
External insulation changes the appearance of a building, so permission may be required depending on the municipality and the building. In the canton of Bern, the building permit is issued by the municipality or the prefecture depending on the project. Check with the municipality before signing a quote.
Can a house in Biel/Bienne's old town be insulated externally?
It is rarely straightforward: the facade is part of the character of the neighbourhood. Internal insulation, or insulating the attic or the cellar floor, are often more discreet options. In every case the decision rests with the municipality, which should be consulted before choosing a solution.
Are there subsidies for insulating a building in Biel/Bienne?
The Buildings Programme (Programme Bâtiments) can support certain insulation work, depending on the canton. In the canton of Bern, the office for the environment and energy runs a subsidy programme. Conditions change: check them before work starts, as an application filed too late may be refused.
Can a tenant have their home insulated?
No, not on their own initiative. The building envelope belongs to the owner or the co-ownership, whose agreement is essential. As a tenant, you can however report a problem (draught, cold wall, mould) to your landlord or the property manager.
What is the CECB for before insulation work?
The cantonal building energy certificate (CECB) describes the condition of the envelope and the heating, then suggests measures. It helps you decide where to start: roof, facade, windows or cellars. It can also serve as a basis for discussion with the companies pricing your work.
Free quote