Carpentry & roofing · VD

Carpenter in Yverdon-les-Bains

Carpenter in Yverdon-les-Bains: doors, timber windows, fitted joinery, staircases, flooring. Describe your works online and compare the quotes received.

Request a quote

Are you looking for a carpenter in Yverdon-les-Bains for a door, windows, a staircase or fitted joinery? The second-largest town in the canton of Vaud, at the end of Lake Neuchâtel, combines an old centre around the castle, rental blocks and detached houses, so carpentry jobs vary greatly from one address to the next. This page presents the usual works, what the location changes, the steps to plan ahead, and how to request and then compare quotes.

What a carpenter does in Yverdon-les-Bains

Carpentry covers both the inside and the outside of a building. The most frequent requests:

  • Doors: front door, interior doors, apartment entrance doors in a block, restoring a door that sticks or no longer closes.
  • Timber windows: repair, replacement, redoing seals and ironmongery. If glazing replacement is your main concern, see also windows and double glazing in Yverdon-les-Bains.
  • Staircases: renovating an old staircase, replacing worn treads, balustrades.
  • Flooring: laying, sanding, repairing boards, replacement after damage.
  • Wardrobes and fitted joinery: dressing rooms, bookcases, kitchen, storage under a sloping roof or in an alcove.

A carpenter holds a CFC (Swiss federal vocational certificate) as a carpenter or cabinetmaker. The workshop makes bespoke pieces, which are then fitted on site; for small repairs, the carpenter comes directly to you.

Old town and castle: original joinery in Yverdon-les-Bains

Around the castle and in the old town, many buildings still have old joinery: solid doors, small-paned windows, timber staircases, period flooring. The reflex is not always to replace everything. A good assessment distinguishes what is sound and repairable from what has truly reached the end of its life.

When the original work is kept, the carpenter intervenes with small touches: replacing a rotten piece, planing a warped leaf, getting the ironmongery working again. When replacement is unavoidable, the new piece can reproduce the proportions, profiles and colours of the old one.

In an old town, these choices do not depend on you alone. Old towns are among the ensembles that the canton of Vaud treats with particular care, and heritage requirements may apply to the appearance of windows and external doors. Only the municipality or the competent cantonal department can say what applies to your building: ask the question before requesting prices.

Blocks, villas and the lake: what the location changes for timber

Yverdon-les-Bains is a town where rental blocks, co-owned buildings and villas coexist. The carpenter’s work adapts to each case:

  • Rental block or co-ownership: an apartment entrance door, a street-side window or a façade often concerns the whole building. Co-ownership uniformity rules may impose the species, colour or model.
  • Villa or detached house: more freedom of choice, but more exposed surfaces: shutters, timber garage doors, external staircase, patio.
  • Apartment: work focuses on fitted joinery, flooring, wardrobes and interior doors. Access (floor, lift, width of the stairwell) determines how long pieces can be brought in.

The proximity of Lake Neuchâtel is felt on exposed wood: humid air, alternating rain and sun, sometimes wind. Exterior timber parts need a suitable finish and regular maintenance. Ask the carpenter what is planned to protect end grain, thresholds and door bottoms, where water stagnates and where wood deteriorates first.

Authorisation, energy, landlord: the steps for your carpentry works

Not every job requires a permit. Repairing an interior door or fitting a wardrobe requires nothing special. However, changing the exterior appearance of a building (windows, front doors, shutters), creating an opening or working on a protected building may require authorisation.

In the canton of Vaud, the building permit is issued by the municipality. When cantonal departments must give an opinion, the file goes through the cantonal permits centre (CAMAC). Before ordering, ask the municipality of Yverdon-les-Bains whether your project is concerned.

On the energy side, replacing windows affects the building’s insulation. The Vaud energy law and the cantonal energy directorate govern these matters, and the canton has a subsidy programme. Conditions change: check them before signing, not after the works. If you are thinking about the whole building envelope, also consider heat pump in Yverdon-les-Bains and, for walls and openings, masonry in Yverdon-les-Bains.

If you are a tenant, the landlord’s consent is in principle required for anything fixed to the home or altering its appearance. In co-ownership, the façade and common areas fall under the owners’ meeting.

Preparing your carpenter request in Yverdon-les-Bains

The more precise the request, the more comparable the quotes. State:

  1. The nature of the work: repair, replacement or creation.
  2. The address and type of building: old town, block, villa, apartment; floor and access.
  3. Approximate dimensions and the number of items concerned (doors, windows, steps).
  4. The preferred material: wood species, colour, finish, or “to be advised”.
  5. Your status: owner, tenant (with the landlord’s consent), co-owner.
  6. Photos: the condition of the existing item helps judge whether to repair or replace.

A serious quote itemises the following: supply (wood species and quality, ironmongery, glazing where applicable), removal of the existing item and disposal, manufacture, fitting, finishes, and ancillary work such as making good plasterwork or paintwork around a frame. If one of these lines is missing, ask whether it is included.

What makes the cost vary: the wood species, the complexity of profiles and curved work, bespoke versus a standard model, the condition of the existing item, site access, the quantity of identical pieces and the level of finish. No serious figure is possible without seeing the site: the quote sets it.

To start, simply request a quote: you describe your works once, and your request is passed on to craftspeople and firms in the region, who contact you to prepare a free, no-obligation quote. Then compare what is actually included, not just the total.

Useful pages around this job

Updated 29 October 2026

Free, no-obligation quote request

Describe your project: your request is passed on to tradespeople in your area.

Frequently asked questions

Do I need a permit to replace timber windows in Yverdon-les-Bains?
It depends on the building and its location. In the old town or on a building of heritage value, changing windows may require authorisation. Check with the municipality of Yverdon-les-Bains, which issues building permits, before you order.
Can a tenant have a built-in wardrobe or fitted joinery installed?
Joinery fixed to the home alters the rented property: the landlord's written consent is in principle needed before the work. Tell the carpenter from the outset, as it affects the choice of fixings and what can be dismantled when you leave.
What is the difference between a carpenter and a cabinetmaker?
Both trades go through a CFC (Swiss federal vocational certificate). The carpenter works mainly on the building: doors, windows, staircases, flooring, wardrobes. The cabinetmaker is more focused on furniture and finishing pieces. For bespoke fitted joinery, either profile may suit.
Can an old door or window be repaired rather than replaced?
Often yes: readjusting, replacing a damaged part, redoing the seals or the ironmongery. For an older piece, repair keeps the original appearance, which matters in an old building. The carpenter judges on site whether the wood is still sound.
How do I compare two carpentry quotes?
Check that both cover the same work: wood species, type of finish, removal of the existing item, disposal, fitting and adjustments. A gap often comes from a line missing in one of the quotes rather than a real difference in price.